Bulb-T and Glulam-FRP Beams for Timber Bridges
In this paper, we discusses the manufacturing, analysis, and testing of two glulam beam designers:(1) Southern pine bulb, and (2) yellow-poplar reinforced with pultruded fiber-reinforced...

Design and Construction of Post-Tensioned Concrete Floor Systems
This is a summary of the original full length paper which is available from the author. This paper assumes a basic technical knowledge of reinforced concrete design and prestressed concrete...

Anchorage of Non-Metallic Prestressing Tendons
Experimental confirmation tests were conducted to evaluate mechanical and epoxy socketed anchors for fiber reinforced plastic (FRP) prestressing tendons. The studies found that a parabolically...

Nonlinear Analysis of Prestressed Concrete Structures
This paper presents a finite element model for the nonlinear analysis of prestressed concrete structures. The model can be used to analyze pretensioned or posttensioned, bonded or unbonded...

Recent Advances in 3D Non-Linear FE-Analysis of R/C and P/C Beam Structures
A new simple modelling of interface problems in non-linear FE-analysis of reinforced concrete (R/C) and prestressed concrete (P/ C) structures is presented. It consists in taking account...

Seismic Behavior of Non-Ductile Concrete Frame Structures
Non-ductile reinforced concrete (RC) frame structures designed and constructed during the 1950's through 1970's exist in many regions of the United States. The frames of these structures...

Seismic Retrofit of R/C Columns with Inadequate Lap Splices
This paper presents experimental results on the use of rectangular steel jackets to improve the seismic performance of rectangular steel jackets to improve the seismic performance of rectangular...

Glass-covered Lightweight Spatial Structures
The double curved reticulated spatial structure with triangular mesh is the most favorable basis for a translucent roof. But this structure, especially is directly glazed without intermediate...

Damage Prediction in Reinforced Concrete Structures under Cyclic Loading
Assessment of the stiffness, resistance and damage behaviour of reinforced concrete members under high cyclic loading due to earthquake actions must consider material nonlinear effects...

Blast Demolition of Reinforced Concrete Industrial Chimneys
On some of recently demolished chimneys, transient measurements were taken, in the vicinity of the tilting hinge, during the process of falling down. Thus, corresponding dynamic computational...

Research of Strength and Deformations with Long-time Loading and the Use of Glassfiber Reinforced Concrete in Shells
Presented is an experimental research on the properties of behavior on compression and tension of glassfiber reinforced concrete of alkali-resistant glass fiber under long-time load and...

A Practical Design and Construction of Tension Rod Supported Glazing
In designing a glass skin-covered space, for the atrium, entrance hall or other core part of a building complex, the high openness and quality requirements of the space often lead to the...

Elasto - Plastic Analysis of Cable Net Structures
This paper presents a Newton-Raphson interaction technique which takes account of plastic cable strains while iterating on the nodal equilibrium equations of cable net structures. The...

Concrete Shells Today
Providing high structural qualities, modern shells using experimental forms will attract new attention due to their limitless repertory. Presented is a new form of construction, instead...

Nonlinear Behavior of Northlight Reinforced Concrete Shells
The behavior of northlight shells is very sensitive to the boundary conditions at the top and bottom edges of the shell. The aim of this paper is to investigate the structural action of...

Study on Reinforced Concrete Cylindrical Shells with Edge Members under Impact Loading
The strength, cracking patterns and the other nonlinear dynamic behaviors of reinforced concrete roof-type circular cylindrical shells influenced by edge member stiffness and supporting...

Nonlinear Analysis of a Reinforced Concrete Folded Plate Structure
This paper deals with the ultimate load analysis of a reinforced concrete (RC) folded plate shell subjected to dead load and monotonically increasing live loads, statically applied, using...

Spatial Structures Erected out of Thin Shell Elements Fabricated on Plane Followed by Bending
The paper offers the examples of spatial structures of average spans (up to 24 m) and engineering structures made of prefabricated curvilinear elements originally having a plane form....

Ultimate Strength of R/C Cooling Tower Shell
Reinforced concrete(R/C) cooling towers are the largest, thin shell structures. It is important to assess the ultimate strength of R/C cooling tower shells subjected to wind load. In the...

Repair of a Cracked Cooling Tower Shell Based on Numerical Simulations
The present condition of a 30 years old cooling tower shell made of reinforced concrete is characterized by a relatively large number of long, thermally induced meridional cracks. For...

 

 

 

 

Return to search